Heavy-Duty Epoxy Flooring Designed for Perth Industrial Envit to perform. At Rock Solid Concrete Resurfacing, we provide professional Industrial Epoxy Flooring Perth businesses can rely on for strength, safety, cleanliness and long-term surface protection. Our industrial epoxy systems are suitable for warehouses, factories, manufacturing facilities, mechanical workshops, storage areas, processing environments and other demanding workplaces across Perth.
Industrial concrete floors are regularly exposed to forklifts, pallet movement, machinery, foot traffic, oils, grease, dirt, cleaning products and accidental spills. An untreated or poorly coated concrete floor can gradually become dusty, stained, cracked, uneven or difficult to maintain. We install purpose-selected epoxy flooring systems that protect the concrete substrate while creating a cleaner, more professional and practical working surface.
With more than 20 years of industry experience, our team understands that successful epoxy flooring involves much more than applying a coating over concrete. Proper surface preparation, concrete assessment, crack repairs, moisture considerations and product selection all influence the final result.
We carefully evaluate the condition and use of your floor before recommending a suitable system. This helps us deliver epoxy flooring Perth industrial property owners can confidently use in demanding day-to-day conditions.
To arrange an industrial flooring assessment or request a free quote, call 0430 733 045, email info@rocksolidconcreteresurfacing.com.au, or submit an enquiry through our contact form.
Benefits of Industrial Epoxy Flooring in Perth
Choosing a professional Epoxy Flooring Perth installation delivers a long list of practical, financial, and aesthetic advantages. Here's why so many Perth businesses make the switch:
Extreme Durability.
Industrial epoxy systems are engineered to withstand compressive loads, impact, abrasion, and constant vehicle traffic. A well-installed floor can easily last 15 to 20 years, often longer, with minimal maintenance.
Chemical Resistance:
Our epoxy coatings resist oils, greases, hydraulic fluids, brake fluid, petrol, diesel, most acids, alkalis, and industrial cleaning agents. Spills wipe away rather than soaking into the concrete.
Seamless and Hygienic:
With no grout lines, tile joints, or porous surfaces to trap dirt, epoxy is easy to sweep, mop, or pressure-clean. This makes it ideal for food preparation areas, laboratories, medical facilities, and any workspace where hygiene is non-negotiable.
Enhanced Safety:
Non-slip additives can be incorporated to boost traction in wet or oily environments. High-visibility line-marking, safety zones, hazard striping, and colour-coded workflow areas can all be integrated directly into the coating.
Improved Lighting:
A gloss or satin epoxy floor reflects overhead lighting, brightening warehouses and workshops without adding a single fixture. Many clients report noticeable energy savings after installation.
Dust-Free Environment:
Bare concrete constantly sheds fine dust, which damages machinery, coats stock, and irritates workers. Epoxy locks that dust in permanently.
Aesthetic Appeal:
From high-gloss showroom finishes to decorative flake systems in a range of colours, epoxy transforms tired, stained concrete into a professional, polished surface that reflects the quality of your business.
Long-Term Value:
When you calculate cost per square metre per year of service life, professionally installed industrial epoxy consistently beats vinyl, tiles, and cheaper coating alternatives.
Types of Industrial Epoxy Flooring Systems We Offer
Not every floor needs the same system. At Rock Solid Concrete Resurfacing, we install the full range of professional-grade Epoxy Flooring Perth products, matching the system to your operational demands, budget, and aesthetic preferences.
Solvent-Free Epoxy Coatings:
A cost-effective, high-gloss finish ideal for warehouses, workshops, and commercial spaces. Fast-curing, low-odour, and available in a wide range of colours.
High-Build Epoxy Systems:
Thicker coatings (typically 500 microns to 1mm) that deliver exceptional durability for heavy-traffic industrial environments. Perfect for manufacturing plants and distribution centres.
Epoxy Flake Systems:
Decorative vinyl flakes are broadcast into a coloured epoxy base coat, then sealed with a clear topcoat. The result is a stunning, textured, non-slip finish popular in garages, showrooms, and hospitality venues.
Self-Levelling Epoxy:
A poured, seamless system that creates a mirror-smooth surface even over slightly uneven substrates. Ideal for showrooms and premium commercial spaces.
Anti-Slip Epoxy Coatings:
Aluminium oxide or quartz aggregate is added to increase traction in wet, oily, or high-risk environments, essential for kitchens, food-processing areas, and outdoor loading zones.
Chemical-Resistant Epoxy Novolac Systems:
Engineered for laboratories, chemical plants, and pharmaceutical facilities where aggressive acids and solvents are part of daily operations.
Antistatic (ESD) Epoxy Flooring:
Specialised systems that dissipate static electricity — critical for electronics manufacturing, data centres, and explosion-risk environments.
Polyurethane Topcoats:
Applied over an epoxy base for enhanced UV stability, abrasion resistance, and chemical protection. Highly recommended for outdoor areas or sites with heavy fork-truck traffic.
Professional Concrete Preparation
The quality of an industrial epoxy floor is closely linked to the quality of the concrete preparation beneath it.
Applying epoxy to weak, contaminated, damp or poorly prepared concrete can lead to poor adhesion, bubbling, peeling or premature failure. For this reason, preparation is never treated as an optional step. Our preparation process may include the following services.
01
Removal of Existing Floor Coverings
−
Existing vinyl, carpet, tiles, adhesives, coatings or damaged flooring materials may need to be removed before the concrete can be assessed and prepared.
02
Glue and Coating Removal
+
Old adhesives and coatings can interfere with epoxy adhesion. We use professional equipment to remove unsuitable surface materials and expose a substrate that can be assessed for the new system.
03
Concrete Grinding
+
Mechanical grinding opens the concrete surface and removes laitance, weak material and remaining contaminants. It also creates a suitable surface profile for the selected coating.
The grinding process required will depend on:
- Concrete hardness
- Existing coatings
- Surface contamination
- Floor condition
- Required coating system
- Accessibility
- Project size
04
Crack and Surface Repairs
+
Cracks, holes, spalling and damaged sections should be assessed before coating.
Some cracks may be repaired or filled as part of the preparation process. However, crack repair does not guarantee that structural movement will stop. Active cracks, slab movement and structural concerns may require further assessment.
We clearly explain what can reasonably be achieved before installation.
05
Floor Levelling and Localised Repairs
+
Industrial concrete slabs are rarely perfectly flat. Localised high points, low sections, ridges and transitions can interfere with operations or the appearance of the final coating.
Depending on the condition, we may recommend:
- Key grinding
- Localised filling
- Floor levelling
- Edge repairs
- Trip-hazard reduction
- Surface restoration
The scope will be based on an on-site inspection.
06
Moisture Assessment
+
Moisture movement through a concrete slab can affect epoxy adhesion and long-term performance. This is especially important for newer slabs, below-ground areas and floors with existing moisture problems.
Where moisture is suspected, further assessment or an appropriate moisture-management system may be required. A coating should not be used to conceal an unresolved water leak or drainage problem.
07
Cleaning and Dust Removal
+
After grinding and repairs, the floor must be thoroughly cleaned. Dust and debris can prevent proper bonding between the coating and concrete. We prepare the surface carefully before beginning the coating application.
Our Proven Installation Process
The difference between an epoxy floor that lasts 20 years and one that peels within six months almost always comes down to preparation. Get the prep right, and the coating performs. Skip corners, and it fails. That's why our installation process is built around meticulous surface preparation, the foundation of every quality Industrial Epoxy Flooring Perth installation we complete.
Site Inspection and Consultation
We visit your site, inspect the existing slab, discuss your operational needs, and identify any moisture issues, cracks, contamination, or trip hazards that need to be addressed. You'll receive a written quote with a clear scope of works and no hidden extras.
Removal of Existing Coatings
Old vinyl, carpet, tile adhesives, paint, or failed epoxy systems are stripped back completely. We use industrial-grade removal equipment to clear the substrate without damaging the underlying concrete.
Diamond Grinding and Surface Profiling
This is where quality is won or lost. Using modern diamond grinders and shot-blasters, we mechanically profile the concrete to create the correct surface texture (CSP) for optimum epoxy adhesion. Dust is captured with HEPA-filtered vacuums for a cleaner worksite.
Crack and Joint Repair
Cracks, spalls, and expansion joints are repaired using flexible, high-strength epoxy fillers. Trip hazards are ground down and levelled to create a safe, uniform surface.
Priming
A specialised primer is applied to lock the epoxy system into the prepared concrete and prevent outgassing (pinholes and bubbles caused by trapped air).
Base Coat Application
The chosen epoxy base coat is applied at the specified thickness using rollers, squeegees, or spray equipment, depending on the system. This is where colour, texture, and decorative flakes are introduced.
Topcoat and Sealing
A clear or pigmented topcoat is applied to lock in the finish, provide UV stability, and deliver the specified level of gloss, chemical resistance, and non-slip traction.
Final Inspection and Handover
Once fully cured, we walk the finished floor with you, explain the maintenance requirements, and hand over care instructions. Your new floor is ready for foot traffic within 24 hours and full mechanical loading within 5 to 7 days (system-dependent).
Why Perth Chooses Rock Solid Concrete Resurfacing
There are plenty of concrete companies in Perth, so why do so many homeowners, builders and business owners choose us, and keep coming back?
Over 20 years of industry experience
Experience matters in this trade. We've seen every type of concrete problem Perth can throw at us, and we know exactly how to fix it properly, the first time.
Genuine specialists, not generalists
Concrete resurfacing, stencilling and coatings are all we do. Our team has specialised solely in this field for over a decade, giving us a depth of expertise that general trades simply don't have.
Family-owned and operated
We're a local Perth family business with our name and reputation on the line with every job. You'll deal with real people who genuinely care about the outcome.
100% satisfaction guarantee
We stand behind every project we complete. Our knowledge, passion and skills mean we're confident guaranteeing your satisfaction, and we do.
Latest techniques and technology
We continually invest in the latest resurfacing techniques, coating technologies and specialised equipment so our customers always receive the most effective, longest-lasting solutions available.
Save thousands compared to replacement
Resurfacing transforms your existing concrete at a fraction of the cost of demolition and replacement, with none of the mess, disruption or waste.
Residential, commercial and industrial expertise
From a single garage floor to a large-scale warehouse coating, we have the team, equipment and experience to handle projects of every size.
We work around your schedule
Need the job done within a specific timeframe? We pride ourselves on our workmanship and our customer service, completing projects on time and working around your schedule.
Frequently Asked Questions - Industrial Epoxy Flooring in Perth
01
How long does an industrial epoxy floor last?
A professionally installed industrial epoxy system typically lasts 15 to 20 years or more, depending on the environment, traffic loads, and maintenance regime. High-build systems in less abrasive settings can last considerably longer.
02
How long does installation take?
Most projects take between 2 and 5 days from grinding to final topcoat, depending on the size of the area and the complexity of the system. Larger projects may be staged to keep parts of your facility operational.
03
When can I use the floor after installation?
You can typically walk on the floor within 24 hours, drive light vehicles on it after 3 days, and expose it to full mechanical loading (forklifts, heavy machinery) after 5 to 7 days. Specific cure times depend on the system and ambient conditions.
04
How much does industrial epoxy flooring cost in Perth?
Pricing varies significantly based on the system chosen, the condition of the existing slab, the level of preparation required, and the size of the area. Every quote we provide is customized, call us on 0430 733 045 for accurate pricing for your project.
05
Can epoxy be applied over old, damaged concrete?
In most cases, yes. Cracks, spalls, and surface damage can be repaired as part of the preparation process. However, structurally compromised slabs or floors with severe moisture issues may need additional remedial work first. Our free on-site inspection will identify any concerns before quoting.
06
Is epoxy flooring slippery when wet?
Standard smooth epoxy can be slippery when wet. We recommend adding anti-slip aggregates (quartz, aluminium oxide, or vinyl flakes) to any floor exposed to moisture, oil, or food spills. Our team will advise on the appropriate non-slip profile for your environment.
07
Do you handle line-marking and safety zones?
Absolutely. Safety zones, walkways, hazard striping, forklift lanes, and equipment outlines can all be incorporated directly into the epoxy system for a permanent, hard-wearing finish.
08
Do you offer a warranty?
Yes, every installation is backed by a written workmanship warranty. Product warranties are also available from the coating manufacturers we use.
09
Can I install epoxy flooring myself?
DIY kits exist, but the reality is that surface preparation, moisture testing, primer selection, and application technique all require professional equipment and experience. Poorly installed epoxy is one of the most common causes of premature coating failure. For an industrial or commercial site, a professional install pays for itself many times over.